William Fletcher, via email

Posted: April 1, 2013

By: Grid Michal

How do you change a 2007 225 Honda’s impellers and water pump?
You can do this one of three ways:

1. Make sure the engine is shut off, the key is removed from the ignition and the shift is in neutral. Separate the speedometer pickup hose. Remove the torque tab. Remove the nine bolts holding the gearcase on and lower it.

 Remove the four bolts holding the water-pump housing on. Remove the impeller. Install all the components of the kit, and reverse the process to install the gearcase.

2. Get a SELOC manual and follow the same procedure. The manual will have pictures.

3. Take it to a dealer who is comfortable doing the job right the first time.

captcha ff1b112d48294244ac41004f9db58dc4