Tuesday, June 6, 2023

    How to start an outboard motor?

    Starting an outboard motor is an essential skill that every boat owner should know. Whether you are preparing to launch your boat into the water or trying to get back to shore after a long day at sea, starting your outboard motor is essential. In this article, we will cover the steps you need to take to start an outboard motor.

    Before starting the outboard motor, it is essential to perform a quick check to ensure that everything is in good working order. Start by checking the fuel tank level and ensure that there is sufficient fuel for your boating trip. Check the oil level and ensure that it is at the right level. Also, ensure that the battery is fully charged and that all the electrical connections are secure.

    Once you have done the necessary checks, follow these steps to start the outboard motor.

    1. Move the Outboard Control Handle to Neutral

    Make sure that the outboard control handle is in the neutral position. This will disengage the transmission and make it easier for the engine to crank.

    2. Turn the Ignition to the On Position

    Turn the key on the ignition and ensure that it is in the on position. This will allow the engine to receive the necessary electrical power to start.

    3. Choke the Engine

    If the engine is cold, pull the choke valve out. This will allow more fuel to flow into the engine, making it easier to start.

    4. Turn the Kill Switch to the On Position

    The kill switch is an essential safety feature that shuts off the engine in case of an emergency. Ensure that the kill switch is in the on position before starting the engine.

    5. Prime the Engine

    If your engine has a primer bulb, ensure that it is pumped several times to prime the fuel system.

    6. Crank the Engine

    Press the start button or turn the key to crank the engine. If the engine doesn’t start on the first attempt, wait a few seconds, and try again.

    7. Adjust the Throttle

    Once the engine starts running, adjust the throttle to prevent the engine from stalling. Depending on the type of outboard motor, you may have to hold the choke or adjust the throttle manually to keep the engine running.

    Finally, remember to always keep your outboard motor well-maintained to ensure reliable performance. Regularly check the oil level, clean the spark plugs, and change the oil at recommended intervals.

    Starting an outboard motor is a straightforward process that requires a bit of preparation and attention to detail. By following the steps outlined in this article, you can start your outboard motor with confidence and get out on the water without any problems.

    Have something to add or correct? Please let us know by clicking here.
    * See disclaimer in the footer of the site for use of this content.

    Related Questions

    Latest Posts

    Don't Miss

    Our Newsletter

    Get the latest boating tips, fishing resources and featured products in your email from BoatingWorld.com!